Watershed Monitoring Instrumentation
Datalogger Sensors
Water Quality Meters
Flow & Current Meters
Sampling Instruments
Ground Water Instruments

Water Quality Sensors

Analite 9000 Turbidity Probe Specifications

Ranges: 100, 400 or 1,000NTU. Other range values available up to 3,000NTU

Resolution: 100NTU 0.2NTU; 400NTU 1.0NTU; 1,000NTU 3.0NTU

Repeatability: 1% at 25 C for 100NTU and 400NTU; 2% at 25 C for 1,000NTU

Linearity: Better than 1% for 100NTU and 400NTU; Better than 5% for 1,000NTU

Temp. Coefficient: Better than 0.05% / C.

Outputs: 0 to 2.5V over range. -2.5V to +2.5V also available

Zero Offset: 3mV (0 to 40 C)

Calibration: Factory calibrated using non-toxic AEPA polymer solutions

Power: 9.6 - 28V dc, 15mA ON. 40mA when wiping for NEP9500 models only

Settling Time: <1 second after application of power

Wiping: For NEP9500 models only - Initiated by >50 msec contact closure

Wipe Time: 6 seconds nominal

Depth Rating: 100m

Operating Temp: -10 C to 40 C

Storage Temp: -20 C to 50 C

Probe Diameter: 32mm

Probe Length: 245mm including cable gland

Weight: 380gms probe only

Construction: Stainless steel casing with plastic fiber-optic face

Cable: Shielded 5 core, 6mm diameter. Conductor resistance 45 ohms per km. Weight: 70gr/m

Cable Length: To order - 99 meters maximum



Copyright 2001 Geo Scientific Inc., All Rights Reserved
Home | Contact Us